top of page
APBMW S8-4

Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.

 

The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.

APBMW S8-4

  • +

    Subwoofer for BMW-MINI

  • Technical Data

    Component   Woofer
    Size mm (in.) 200 (8)
    Power Handling W peak

    W continuos

    300

    150

    Impedance Ω 2
    Frequency Response Hz 35 ÷ 500
    Magnet size D x d x h mm

    (in.)

    48 (1.89) x 18 (0.71) x 7 (0.28)
    Weight of one speaker kg (lb.) 1,21 (2.67)
    Voice Coil Ø mm (in.) 50 (2)

     

bottom of page